WhatsApp 08160381540 
1 Week Free Business Listing
 
 

₦40,000.00

UPCOMING OIL/GAS TRAINING COURSES IN LAGOS

Description/Service

UPCOMING OIL/GAS TRAINING COURSES IN LAGOS

Geoken Tech Services Nig Limited: is an incorporated company, that is into training of relevant oil/gas, Engineering design software’s. Below are following courses in which we train.

Course Specification:
COURSE TARGET AUDIENCE
1 AUTOCAD (2D/3D) Mechanical, Electrical, Material & Metallurgical Engineers/Trainee, NYSC Members, Jobseekers
2 PIPING DESIGN (PDMS) Mechanical, Chemical, Process Engineers/Trainee, NYSC Members, Jobseekers
3 PROCESS DESIGN & OPTIMIZATION(HYSYS) Process, Chemical Engineers/Trainee Engineers, Jobseekers
4 RESERVOIR MODELING & WELL LOGGING(PETREL) Geologist, Reservoir Engineers, Geophysicist, Well Engineers
Well site Geologist /Graduate trainee
5 PIPING &INSTRUMENTATION DESIGN (P&ID) Mechanical, Process, Electrical/Instrumentation Engineers/Graduate trainee

COURSE MODULES ( AUTOCAD 2D/3D)

Title: Engineering Design, Drafting & Modeling
Overview: the course is design for student to have in depth knowledge to Engineering design and Procurement
• Introduction to AutoCAD 2d Toolbar
• Application of Tools bar( draw, modify, object snap, Properties, Status, Command)
• Setting AutoCAD drawing Limits
• Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc
• Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc)
• Introduction to Isometric drawing
• Drawing, dimensioning and editing Isometric drawing
• Introduction to AUTOCAD 3D
• AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style)
• Creating solid object with AutoCAD 3d tools
• Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools
• Rendering of Solid objects

FIG 1: AUTOCAD DRAFTING & DESIGN

FIG 2: 3D MODELING

2. PETREL (SEISMIC & WELL LOGGING INTERPRETATION)
COURSE MODULES
•Basic theory of seismic reflection prospecting method in oil and gas.
Petrel Introduction & Interface

•Different types of well logs and their uses.
•Loading of 3D seismic reflection data, making Surfaces & Horizon
Seismic Visualization & QC
•Picking of faults (Importing fault data/Fault modeling)
•Loading of well logs

Importing well heads, well deviation & well tops
•Seismic-to-well tie using synthetic seismogram
•Mapping of reservoirs tops and base
• Generation of depth structures map using check shot data.
•Calculation of petro physical parameters
•Generation of various attributes maps
•Identification of prospects.

FIG 3: WELL CORRELATION, SEISMIC WELL TIE WITH PETREL

3. PIPING DESIGN & DRAFTING (PDMS)
COURSE MODULE:
•Introduction to Plant Equipments type
•Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler,
Fractionating columns.
•Taking coordinate/Equipments position from plant plan drawing (GAD)
•Using the Primitive method to design Equipments
•Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole)
•Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange,
Gasket) etc
•Piping Setting
•Pipe specification in PDMS
•Pipe Routing (Linking equipments with pipes)
•Modifying the Head/Tail of a Pipe
•Supporting Plant with Structures (Beams, Columns, Slab)

FIG 4: EQUIPMENT DESIGN & PIPE ROUTING WITH PDMS
4. PROCESS DESIGN & OPTIMIZATION (ASPEN HYSYS)
COURSE MODULE:
•Introduction to Aspen Hysys
•Hysys working Environment
•Adding component to workflow
•Adding Fluid package
•Entering Hysys Simulation Environment
•Adding material and Energy stream
•Building Simulation
•Analyze the Property Using case Study
•Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash
Separators)
•Equilibrium Reaction
•Working on Hysys Project

5. PIPING & INSTRUMNETATION DESIGN/DIAGRAM (P&ID)

COURSE MODULE:
• Introduction to P&ID workspace
• P&ID Tools Palette
• Creating a New P&ID Project
• Inserting Equipments (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space
• Connecting Equipments together with Process line
• Assigning Tags to Equipments and Specification to process lines
• Placing control instruments to process lines, Equipments and on control valves
• Checking for Errors by running validation

FIG 5: PIPING & INSTRUMNETATION DETAILS OF FLOW LINES,
CONTROL INSTRUMENTS

For Enquiry, Contact: Geoken Tech Services Nig Ltd
08060360538, 08028553955
Email: kengeotech@yahoo.com

• Training Manuals & Certificate of Completion will be issue

Training Calender:
AUTOCAD & PDMS: ( 15TH – 29TH MAY, 2017)
ASPEN HYSYS & P&ID ( 18TH – 25TH MAY, 2017)
PETREL ( SEISMIC & WELL LOGGING) ( 20TH – 5TH JUNE 2017)

TRAINING CENTRES: 8, OMOTAYO BELLO CLOSE, THOMAS
ESTATE, AJAH-LAGOS( ALONG ABRAHAM
ADESANYA RD)
OUTLET( CENTRE 2): 26, IKOTUN RD, SUIT 15, KAZAM PLAZA, OPP
DOMINO PIZZA

Ad Reference ID: 432593d4c33c81fa

Leave a Comment ( No Login Required)

Time limit is exhausted. Please reload the CAPTCHA.

  1. Agree with Terms and Condition

Information about the ad seller

  • Listed by: geoken
  • Member Since: May 5, 2017

Other items listed by geoken

  • No other ads by this poster found.
Latest items listed by geoken »